Welding Robot

It is used for welding large diameter power conduits. Shielded carbon electrode welder is mounted on the machine. The welding torch is mounted on the boom end and torch is adjusted electrically according to the pipe diameter.

Depending on the depth of the welding opening at the pipe joint to be welded, the torch holding and moving times are programmed by PLC control and welding is performed automatically without touching.

The welding robot moves horizontally on the rails and reaches the other junction and repeats the same operation. The turning of the hollow pipe during welding is done by means of rollers under the pipe. These wheels and the underground welding machine communicate with each other through the program. The choice of the setting where the welding robot is to be operated can be on the floor, on the wall or on the ceiling depending on the layout of the working environment. It is possible to design for any condition.